Failure Analysis - Global Market Outlook (2016-2022)

Failure Analysis - Global Market Outlook (2016-2022)

  • Published: September 2016
  • ID: SMRC15846

According to Stratistics MRC, Global Failure Analysis market is accounted for $4.82 billion in 2015 and is expected to reach $8.3 billion by 2022 to grow at a CAGR of 8.0%.  Rising applications of failure analysis equipment in nanotechnology and medical applications and advancements in technology and usage of failure analysis equipment in semiconductors are some of the factors driving the market. However, high maintenance and equipment cost may hinder the market growth. Demand for failure analysis equipment in emerging nations may create an opportunity to the market.
             
Automotive segment is expected to grow at a highest CAGR during the forecast period. The favourable growth is attributed to high breach of advanced driver assistance systems and driverless vehicles. North America accounted for the largest share in the market, while, Asia Pacific is expected to regiser highest CAGR during the forecast period owing to high concentration of semiconductor industries in countries such as Taiwan, China, Japan, South Korea and India.

Some of the key players in global failure analysis market include Hitachi High-Technologies Corporation, EAG Laboratories, Thermo Fisher Scientific Inc., A&D Company Ltd., FEI Company, CARL Zeiss SMT GmbH, Motion X Corporation, Tescan Orsay Holding, A.S., Jeol Ltd., Intertek Group PLC, RJ Lee Group, Inc. , Evans Analytical Group, Inc., Ops A La Carte LLC, IMR Test Labs and Westpak, Inc.  

Tests Covered:
•  Contamination Analysis
• Adhesive Identification
• Chemical Analysis and Testing
• Coating Contamination
• Corrosion Investigation
• Electrical Overstress(EOS)/Electrostatic Discharge(EDS)
• Fractography
• Mechanical Testing
• Metallography
• Microstructure Evaluation
• NDT
• Regulatory Compliance Testing
• Thermal Mapping
• Weld Testing
• Other Tests

Techniques Covered:
• Common mode Failure Analysis  
• Destructive Physical Analysis
• Failure Modes Effect Analysis(FMEA)
• Failure Modes, Effects, and Criticality Analysis(FMECA)
• Fault Tree Analysis(FTA)
• Functional Failure Analysis
• Physics of Failure Analysis
• Software Failure Analysis
• Sneak Circuit Analysis
• Other Techniques

End User Industries Covered:
• Oil and Gas    
• Aerospace
• Automotive
• Construction
• Chemical and Pharmaceutical
• Food and Beverage
• Industrial
• Defence
• Metrology and Calibration
• Other End User Industries

Products Covered:
• Transmission Electron Microscope
• Focussed ion beam Systems
• Scanning Electron Microscopy
• Dual Beam Systems
• Other Products

Technologies Covered:
• Broad ion milling (BIM)
• Focused ion beam (FIB)
• Reactive ion etching (RIE) 
• Secondary ion mass spectroscopy (SIMS) 
• Energy dispersive X-ray spectroscopy (EDX)
• Chemical mechanical planarization (CMP)

Applications Covered:
• Bio Science
o Biomedical Engineering
o Cellular Biology
o Neuroscience
o Structural Biology
•  Material science
o Ceramic & Glass
o Metals & Metallurgy
o Nanofabrication
o Paper & Fiber Material
o Polymer
• Electronics
o MEMS and Thin Film Production
o Semiconductor Manufacturing
• Industrial Science
o Mining
o Automotive & Aerospace
o Chemical
o Machinery & Tools
o Oil & Gas
o Power Generation & Energy
o Renewable Energy
o Others

Equipments Covered:
• Scanning Electron Microscope (SEM)
• Focused ION Beam System (FIB)
• Dual–Beam Systems
• Transmission Electron Microscope (TEM)

Regions Covered:
• North America
o US
o Canada
o Mexico
• Europe
o Germany
o France
o Italy
o UK 
o Spain     
o Rest of Europe 
• Asia Pacific
o Japan       
o China       
o India       
o Australia       
o New Zealand      
o Rest of Asia Pacific      
• Rest of the World
o Middle East
o Brazil
o Argentina
o South Africa
o Egypt

What our report offers:
- Market share assessments for the regional and country level segments
- Market share analysis of the top industry players
- Strategic recommendations for the new entrants
- Market forecasts for a minimum of 7 years of all the mentioned segments, sub segments and the regional markets
- Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations)
- Strategic recommendations in key business segments based on the market estimations
- Competitive landscaping mapping the key common trends
- Company profiling with detailed strategies, financials, and recent developments
- Supply chain trends mapping the latest technological advancements

1 Executive Summary         
           
2 Preface  
        
 2.1 Abstract         
 2.2 Stake Holders        
 2.3 Research Scope        
 2.4 Research Methodology       
  2.4.1 Data Mining       
  2.4.2 Data Analysis       
  2.4.3 Data Validation       
  2.4.4 Research Approach       
 2.5 Research Sources        
  2.5.1 Primary Research Sources      
  2.5.2 Secondary Research Sources      
  2.5.3 Assumptions       
           
3 Market Trend Analysis        
 3.1 Introduction        
 3.2 Drivers         
 3.3 Restraints        
 3.4 Opportunities        
 3.5 Threats         
 3.6 End user Analysis        
 3.7 Product Analysis        
 3.8 Technology Analysis       
 3.9 Application Analysis       
 3.10 Emerging markets        
           
4 Porters Five Force Analysis        
 4.1 Bargaining power of suppliers       
 4.2 Bargaining power of buyers       
 4.3 Threat of substitutes       
 4.4 Threat of new entrants       
 4.5 Competitive rivalry        
           
5 Global Failure Analysis Market, By Test       
 5.1 Introduction        
 5.2 Contamination Analysis       
 5.3 Adhesive Identification       
 5.4 Chemical Analysis and Testing       
 5.5 Coating Contamination       
 5.6 Corrosion Investigation       
 5.7 Electrical Overstress(EOS)/Electrostatic Discharge(EDS)    
 5.8 Fractography        
 5.9 Mechanical Testing        
 5.10 Metallography        
 5.11 Microstructure Evaluation       
 5.12 NDT          
 5.13 Regulatory Compliance Testing      
 5.14 Thermal Mapping        
 5.15 Weld Testing        
 5.16 Other Tests        
           
6 Global Failure Analysis Market, By Technique      
 6.1 Introduction        
 6.2 Common-Mode Failure Analysis      
 6.3 Destructive Physical Analysis       
 6.4 Failure Modes Effect Analysis(FMEA)      
 6.5 Failure Modes, Effects, and Criticality Analysis(FMECA)    
 6.6 Fault Tree Analysis(FTA)       
 6.7 Functional Failure Analysis       
 6.8 Physics of Failure Analysis       
 6.9 Software Failure Analysis       
 6.10 Sneak Circuit Analysis       
 6.11 Other Techniques        
           
7 Global Failure Analysis Market, By End User Industry     
 7.1 Introduction        
 7.2 Oil and Gas        
 7.3 Aerospace        
 7.4 Automotive        
 7.5 Construction        
 7.6 Chemical and Pharmaceutical       
 7.7 Food and Beverage        
 7.8 Industrial         
 7.9 Defense         
 7.10 Metrology and Calibration       
 7.11 Other End User Industries       
           
8 Global Failure Analysis Market,By Product      
 8.1 Introduction        
 8.2 Transmission Electron Microscope      
 8.3 Focussed ion beam Systems       
 8.4 Scanning Electron Microscopy       
 8.5 Dual Beam Systems        
 8.6 Other Products        
           
9 Global Failure Analysis Market, By Technology       
 9.1 Introduction        
 9.2 Broad ion milling (BIM)       
 9.3 Focused ion beam (FIB)       
 9.4 Reactive ion etching (RIE)         
 9.5 Secondary ion mass spectroscopy (SIMS)       
 9.6 Energy dispersive X-ray spectroscopy (EDX)     
           
10 Global Failure Analysis Market, By Application      

 10.1 Introduction        
 10.2 Bio Science         
  10.2.1 Biomedical Engineering      
  10.2.2 Cellular Biology       
  10.2.3 Neuroscience       
  10.2.4 Structural Biology       
 10.3 Material Science        
  10.3.1 Ceramic & Glass       
  10.3.2 Metals & Metallurgy      
  10.3.3 Nanofabrication       
  10.3.4 Paper & Fiber Material      
  10.3.5 Polymer        
 10.4 Electronics         
  10.4.1 MEMS and Thin Film Production     
  10.4.2 Semiconductor Manufacturing      
 10.5 Industrial Science         
  10.5.1 Mining        
  10.5.2 Automotive & Aerospace      
  10.5.3 Chemical        
  10.5.4 Machinery & Tools       
  10.5.5 Oil & Gas        
  10.5.6 Power Generation & Energy      
  10.5.7 Renewable Energy       
  10.5.8 Others        
           
11 Global Failure Analysis Market, By Equipment      
 11.1 Introduction        
 11.2 Scanning Electron Microscope (SEM)       
 11.3 Focused ION Beam System (FIB)       
 11.4 Dual–Beam Systems       
 11.5 Transmission Electron Microscope (TEM)       
           
12 Global Failure Analysis Market, By Geography      
 12.1 North America        
  12.1.1 US        
  12.1.2 Canada        
  12.1.3 Mexico        
 12.2 Europe         
  12.2.1 Germany        
  12.2.2 France        
  12.2.3 Italy        
  12.2.4 UK        
  12.2.5 Spain        
  12.2.6 Rest of Europe       
 12.3 Asia Pacific        
  12.3.1 Japan        
  12.3.2 China        
  12.3.3 India        
  12.3.4 Australia        
  12.3.5 New Zealand       
  12.3.6 Rest of Asia Pacific       
 12.4 Rest of the World        
  12.4.1 Middle East       
  12.4.2 Brazil        
  12.4.3 Argentina       
  12.4.4 South Africa       
  12.4.5 Egypt        
           
13 Key Developments         
 13.1 Agreements, Partnerships, Collaborations and Joint Ventures    
 13.2 Acquisitions & Mergers       
 13.3 New Product Launch       
 13.4 Expansions        
 13.5 Other Key Strategies       
           
14 Company Profiling         
 14.1 Hitachi High-Technologies Corporation       
 14.2
EAG Laboratories    
 14.3 Thermo Fisher Scientific Inc.        
 14.4 A&D Company Ltd.         
 14.5 FEI Company         
 14.6 CARL Zeiss SMT GmbH        
 14.7 Motion X Corporation        
 14.8 Tescan Orsay Holding, A.S.        
 14.9 Jeol Ltd.          
 14.10 Intertek Group PLC         
 14.11 RJ Lee Group, Inc.        
 14.12 Evans Analytical Group, Inc.       
 14.13 Ops A La Carte LLC        
 14.14 IMR Test Labs        
 14.15 Westpak, Inc.     


List of Tables           
1 Global Failure Analysis Market Outlook, By Region (2013-2022) ($MN)    
2 Global Failure Analysis Market Outlook, By Test (2013-2022) ($MN)    
3 Global Failure Analysis Market Outlook, By Contamination Analysis (2013-2022) ($MN)  
4 Global Failure Analysis Market Outlook, By Adhesive Identification (2013-2022) ($MN)  
5 Global Failure Analysis Market Outlook, By Chemical Analysis and Testing (2013-2022) ($MN)  
6 Global Failure Analysis Market Outlook, By Coating Contamination (2013-2022) ($MN)  
7 Global Failure Analysis Market Outlook, By Corrosion Investigation (2013-2022) ($MN)  
8 Global Failure Analysis Market Outlook, By Electrical Overstress(EOS)/Electrostatic Discharge(EDS) (2013-2022) ($MN)
9 Global Failure Analysis Market Outlook, By Fractography (2013-2022) ($MN)   
10 Global Failure Analysis Market Outlook, By Mechanical Testing (2013-2022) ($MN)   
11 Global Failure Analysis Market Outlook, By Metallography (2013-2022) ($MN)   
12 Global Failure Analysis Market Outlook, By Microstructure Evaluation (2013-2022) ($MN)  
13 Global Failure Analysis Market Outlook, By NDT  (2013-2022) ($MN)    
14 Global Failure Analysis Market Outlook, By Regulatory Compliance Testing (2013-2022) ($MN) 
15 Global Failure Analysis Market Outlook, By Thermal Mapping (2013-2022) ($MN)   
16 Global Failure Analysis Market Outlook, By Weld Testing (2013-2022) ($MN)   
17 Global Failure Analysis Market Outlook, By Other Tests (2013-2022) ($MN)   
18 Global Failure Analysis Market Outlook, By Technique (2013-2022) ($MN)   
19 Global Failure Analysis Market Outlook, By Common-Mode Failure Analysis (2013-2022) ($MN) 
20 Global Failure Analysis Market Outlook, By Destructive Physical Analysis (2013-2022) ($MN)  
21 Global Failure Analysis Market Outlook, By Failure Modes Effect Analysis(FMEA) (2013-2022) ($MN) 
22 Global Failure Analysis Market Outlook, By Failure Modes, Effects, and Criticality Analysis(FMECA) (2013-2022) ($MN)
23 Global Failure Analysis Market Outlook, By Fault Tree Analysis(FTA)(2013-2022) ($MN)  
24 Global Failure Analysis Market Outlook, By Functional Failure Analysis (2013-2022) ($MN)  
25 Global Failure Analysis Market Outlook, By Physics of Failure Analysis (2013-2022) ($MN)  
26 Global Failure Analysis Market Outlook, By Software Failure Analysis (2013-2022) ($MN)  
27 Global Failure Analysis Market Outlook, By Sneak Circuit Analysis (2013-2022) ($MN)  
28 Global Failure Analysis Market Outlook, By Other Techniques (2013-2022) ($MN)   
29 Global Failure Analysis Market Outlook, By End User Industry (2013-2022) ($MN)   
30 Global Failure Analysis Market Outlook, By Oil and Gas (2013-2022) ($MN)   
31 Global Failure Analysis Market Outlook, By Aerospace (2013-2022) ($MN)   
32 Global Failure Analysis Market Outlook, By Automotive (2013-2022) ($MN)   
33 Global Failure Analysis Market Outlook, By Construction (2013-2022) ($MN)   
34 Global Failure Analysis Market Outlook, By Chemical and Pharmaceutical (2013-2022) ($MN)  
35 Global Failure Analysis Market Outlook, By Food and Beverage (2013-2022) ($MN)   
36 Global Failure Analysis Market Outlook, By Industrial (2013-2022) ($MN)    
37 Global Failure Analysis Market Outlook, By Defense (2013-2022) ($MN)    
38 Global Failure Analysis Market Outlook, By Metrology and Calibration (2013-2022) ($MN)  
39 Global Failure Analysis Market Outlook, By Other End User Industries (2013-2022) ($MN)  
40 Global Failure Analysis Market Outlook, By Product (2013-2022) ($MN)    
41 Global Failure Analysis Market Outlook, By Transmission Electron Microscope (2013-2022) ($MN) 
42 Global Failure Analysis Market Outlook, By Focussed ion beam Systems (2013-2022) ($MN)  
43 Global Failure Analysis Market Outlook, By Scanning Electron Microscopy (2013-2022) ($MN)  
44 Global Failure Analysis Market Outlook, By Dual Beam Systems (2013-2022) ($MN)   
45 Global Failure Analysis Market Outlook, By Other Products (2013-2022) ($MN)   
46 Global Failure Analysis Market Outlook, By Technology (2013-2022) ($MN)   
47 Global Failure Analysis Market Outlook, By Broad ion milling (BIM) (2013-2022) ($MN)  
48 Global Failure Analysis Market Outlook, By Focused ion beam (FIB) (2013-2022) ($MN)  
49 Global Failure Analysis Market Outlook, By Reactive ion etching (RIE) (2013-2022) ($MN)  
50 Global Failure Analysis Market Outlook, By Secondary ion mass spectroscopy (SIMS) (2013-2022) ($MN) 
51 Global Failure Analysis Market Outlook, By Energy dispersive X-ray spectroscopy (EDX) (2013-2022) ($MN)
52 Global Failure Analysis Market Outlook, By Chemical mechanical planarization (CMP) (2013-2022) ($MN)
53 Global Failure Analysis Market Outlook, By Application (2013-2022) ($MN)   
54 Global Failure Analysis Market Outlook, By Bio Science (2013-2022) ($MN)   
55 Global Failure Analysis Market Outlook, By Biomedical Engineering (2013-2022) ($MN)  
56 Global Failure Analysis Market Outlook, By Cellular Biology (2013-2022) ($MN)   
57 Global Failure Analysis Market Outlook, By Neuroscience (2013-2022) ($MN)   
58 Global Failure Analysis Market Outlook, By Structural Biology (2013-2022) ($MN)   
59 Global Failure Analysis Market Outlook, By Material Science (2013-2022) ($MN)   
60 Global Failure Analysis Market Outlook, By Ceramic & Glass (2013-2022) ($MN)   
61 Global Failure Analysis Market Outlook, By Metals & Metallurgy (2013-2022) ($MN)   
62 Global Failure Analysis Market Outlook, By Nanofabrication (2013-2022) ($MN)   
63 Global Failure Analysis Market Outlook, By Paper & Fiber Material (2013-2022) ($MN)  
64 Global Failure Analysis Market Outlook, By Polymer (2013-2022) ($MN)    
65 Global Failure Analysis Market Outlook, By Electronics (2013-2022) ($MN)   
66 Global Failure Analysis Market Outlook, By MEMS and Thin Film Production (2013-2022) ($MN) 
67 Global Failure Analysis Market Outlook, By Semiconductor Manufacturing (2013-2022) ($MN)  
68 Global Failure Analysis Market Outlook, By Industrial Science (2013-2022) ($MN)   
69 Global Failure Analysis Market Outlook, By Mining (2013-2022) ($MN)    
70 Global Failure Analysis Market Outlook, By Automotive & Aerospace (2013-2022) ($MN)  
71 Global Failure Analysis Market Outlook, By Chemical (2013-2022) ($MN)    
72 Global Failure Analysis Market Outlook, By Machinery & Tools (2013-2022) ($MN)   
73 Global Failure Analysis Market Outlook, By Oil & Gas (2013-2022) ($MN)    
74 Global Failure Analysis Market Outlook, By Power Generation & Energy (2013-2022) ($MN)  
75 Global Failure Analysis Market Outlook, By Renewable Energy (2013-2022) ($MN)   
76 Global Failure Analysis Market Outlook, By Others (2013-2022) ($MN)    
77 Global Failure Analysis Market Outlook, By Equipment (2013-2022) ($MN)   
78 Global Failure Analysis Market Outlook, By Scanning Electron Microscope (SEM) (2013-2022) ($MN) 
79 Global Failure Analysis Market Outlook, By Focused ION Beam System (FIB) (2013-2022) ($MN) 
80 Global Failure Analysis Market Outlook, By Dual–Beam Systems (2013-2022) ($MN)   
81 Global Failure Analysis Market Outlook, By Transmission Electron Microscope (TEM) (2013-2022) ($MN) 

Note: Market tables for North America, Europe, Asia Pacific and ROW regions are also presented in the similar manner as the above region

1. What do I do if I have a query on this report?
In case of any queries regarding this report, you can contact the customer service by filing the “Inquiry Before Buy” form available on the right hand side. You may also contact us through email: [email protected] or phone: +1-301-202-5929
2. Is the sample available for this report? Can I request the sample with my specific requirements?
Yes, the samples are available for all the published reports. You can request them by filling the “Request Sample” option available in this page.
Yes, you can request a sample with your specific requirements. All the customized samples will be provided as per the requirement with the real data masked.
3. Format of the report?
All our reports are available in Digital PDF format. In case if you require them in any other formats, such as PPT, Excel etc you can submit a request through “Inquiry Before Buy” form available on the right hand side. You may also contact us through email: [email protected] or phone: +1-301-202-5929
4. Services prior to purchase and after purchase?
We offer a free 15% customization with every purchase. This requirement can be fulfilled for both pre and post sale. You may send your customization requirements through email at [email protected] or call us on +1-301-202-5929.
5. License Type and Delivery?
We have 3 different licensing options available in electronic format.
  • Single User Licence: Allows one person, typically the buyer, to have access to the ordered product. The ordered product cannot be distributed to anyone else.
  • 2-5 User Licence: Allows the ordered product to be shared among a maximum of 5 people within your organisation.
  • Corporate License: Allows the product to be shared among all employees of your organisation regardless of their geographical location.
All our reports are typically be emailed to you as an attachment
6. Purchase procedure and Invoicing?
To order any available report you need to register on our website. The payment can be made either through CCAvenue or PayPal payments gateways which accept all international cards
7. Post sale support?
We extend our support to 6 months post sale. A post sale customization is also provided to cover your unmet needs in the report.

We provide a free 15% customization on every purchase. This requirement can be fulfilled for both pre and post sale. You may send your customization requirements through email at [email protected] or call us on +1-301-202-5929.

Note: This customization is absolutely free until it falls under the 15% bracket. If your requirement exceeds this a feasibility check will be performed. Post that, a quote will be provided along with the timelines.

Select License Type

Single User License (PDF)

 

2 - 5 User License (PDF)

 

Site License (PDF)

 

Corporate License (PDF)

 

Have a Question?


Know our Methodology

WHY CHOOSE US ?

Assured Quality

Best in class reports with high standard of research integrity

24X7 Research Support

Continuous support to ensure the best customer experience.

Free Customization

Adding more values to your product of interest.

Safe & Secure Access

Providing a secured environment for all online transactions.

Trusted by 600+ Brands

Serving the most reputed brands across the world.

Testimonials