Metal Matrix Composites - Global Market Outlook (2019-2027)
According to Stratistics MRC, the Global Metal Matrix Composites Market is accounted for $560.38 million in 2019 and is expected to reach $1,044.94 million by 2027 growing at a CAGR of 8.1% during the forecast period. Increasing demand for lightweight & strong MMC from the ground transportation end-use industry is the major factor propelling the market growth. However, lack of experienced workforce for manufacturing metal matrix composites is restraining the growth of the market.
Metal matrix composites (MMCs) are compound materials with two constituent parts, one being a metal and other being either metal or ceramic or other natural compounds. They exhibit better properties as compared to polymers such as lightweight, higher temperature resistance, fire resistance, zero moisture absorption, higher transverse stiffness and strength, higher electrical conductivity, higher thermal conductivities, and better radiation resistance.
Based on the product, the aluminium metal matrix composite segment is estimated to have a lucrative growth in the forecast period. Aluminium MMC reduce thermal expansion & raise fatigue resistance leading to wide application scope in light weight, passenger & heavy vehicles. Aluminium reinforced composite are widely used in car clutch &face plate assembly and crank shaft due to excellent fatigue, heat and abrasion resistance properties.
By geography, Asia Pacific is going to have a lucrative growth during the forecast period due to government favourable tax policies for light commodity vehicle. Indian competency, low budget technology and high success rate of launching space satellites & crafts has grabbed world attention. Increasing aging population and rising economic standards in China, Japan and India may propel regional growth.
Some of the key players profiled in the Metal Matrix Composites Market include Sandvik AB, CPS Technologies Corporation, GKN Sinter Metals, 3M, Metal Matrix Cast Composites, Deutsche Edelstahlwerke GmbH, Plansee Se, Ferrotec Corporation, Ceramtec, Materion Corporation, Sumitomo Electric Industries Ltd., Hitachi Metals, Ltd., Thermal Transfer Composites LLC, Santier and 3A Composites.
Reinforcement Types Covered:
• Discontinuous
• Particle
• Continuous
Products Covered:
• Magnesium Metal Matrix Composite
• Refractory Metal Matrix Composite
• Aluminium Metal Matrix Composite
• Nickel Metal Matrix Composite
• Copper Metal Matrix Composite
• Super Alloy Metal Matrix Composite
• Other Products
Production Technologies Covered:
• Casting
• Deposition Techniques
• Liquid Metal Infiltration
• Powder Metallurgy
End Users Covered:
• Aerospace & Defense
• Ground Transportation
• Industrial
• Electronics/Thermal Management
• Marine
• Nuclear
• Healthcare
• Automotive
Regions Covered:
• North America
o US
o Canada
o Mexico
• Europe
o Germany
o UK
o Italy
o France
o Spain
o Rest of Europe
• Asia Pacific
o Japan
o China
o India
o Australia
o New Zealand
o South Korea
o Rest of Asia Pacific
• South America
o Argentina
o Brazil
o Chile
o Rest of South America
• Middle East & Africa
o Saudi Arabia
o UAE
o Qatar
o South Africa
o Rest of Middle East & Africa
What our report offers:
- Market share assessments for the regional and country-level segments
- Strategic recommendations for the new entrants
- Covers Market data for the years 2018, 2019, 2020, 2024 and 2027
- Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations)
- Strategic recommendations in key business segments based on the market estimations
- Competitive landscaping mapping the key common trends
- Company profiling with detailed strategies, financials, and recent developments
- Supply chain trends mapping the latest technological advancements
Free Customization Offerings:
All the customers of this report will be entitled to receive one of the following free customization options:
• Company Profiling
o Comprehensive profiling of additional market players (up to 3)
o SWOT Analysis of key players (up to 3)
• Regional Segmentation
o Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check)
• Competitive Benchmarking
o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances
Table of Contents
1 Executive Summary
2 Preface
2.1 Abstract
2.2 Stake Holders
2.3 Research Scope
2.4 Research Methodology
2.4.1 Data Mining
2.4.2 Data Analysis
2.4.3 Data Validation
2.4.4 Research Approach
2.5 Research Sources
2.5.1 Primary Research Sources
2.5.2 Secondary Research Sources
2.5.3 Assumptions
3 Market Trend Analysis
3.1 Introduction
3.2 Drivers
3.3 Restraints
3.4 Opportunities
3.5 Threats
3.6 Product Analysis
3.7 End User Analysis
3.8 Emerging Markets
3.9 Impact of Covid-19
4 Porters Five Force Analysis
4.1 Bargaining power of suppliers
4.2 Bargaining power of buyers
4.3 Threat of substitutes
4.4 Threat of new entrants
4.5 Competitive rivalry
5 Global Metal Matrix Composites Market, By Reinforcement Type
5.1 Introduction
5.2 Discontinuous
5.2.1 Short Fibers
5.2.2 Whiskers
5.3 Particle
5.4 Continuous
6 Global Metal Matrix Composites Market, By Product
6.1 Introduction
6.2 Magnesium Metal Matrix Composite
6.3 Refractory Metal Matrix Composite
6.4 Aluminium Metal Matrix Composite
6.5 Nickel Metal Matrix Composite
6.6 Copper Metal Matrix Composite
6.7 Super Alloy Metal Matrix Composite
6.8 Other Products
6.8.1 Cobalt
6.8.2 Iron Metal Matrix Composite
6.8.3 Cobalt-Nickel
6.8.4 Beryllium Metal Matrix Composite
6.8.5 Titanium Metal Matrix Composite
7 Global Metal Matrix Composites Market, By Production Technology
7.1 Introduction
7.2 Casting
7.2.1 Compo-Casting
7.2.2 Stir Casting
7.2.3 Low-Pressure Casting
7.2.4 Gravity Casting
7.3 Deposition Techniques
7.3.1 Spray Foaming
7.3.2 Chemical Vapour Deposition
7.3.3 Electroplating
7.4 Liquid Metal Infiltration
7.4.1 Squeeze Casting Infiltration Method
7.4.2 Gas Pressure Infiltration
7.5 Powder Metallurgy
7.5.1 Extrusion/Rolling
7.5.2 Vacuum Pressing
7.5.3 Hot Pressing
7.5.4 Ball Mill Mixing
8 Global Metal Matrix Composites Market, By End User
8.1 Introduction
8.2 Aerospace & Defense
8.3 Ground Transportation
8.4 Industrial
8.5 Electronics/Thermal Management
8.6 Marine
8.7 Nuclear
8.8 Healthcare
8.9 Automotive
9 Global Metal Matrix Composites Market, By Geography
9.1 Introduction
9.2 North America
9.2.1 US
9.2.2 Canada
9.2.3 Mexico
9.3 Europe
9.3.1 Germany
9.3.2 UK
9.3.3 Italy
9.3.4 France
9.3.5 Spain
9.3.6 Rest of Europe
9.4 Asia Pacific
9.4.1 Japan
9.4.2 China
9.4.3 India
9.4.4 Australia
9.4.5 New Zealand
9.4.6 South Korea
9.4.7 Rest of Asia Pacific
9.5 South America
9.5.1 Argentina
9.5.2 Brazil
9.5.3 Chile
9.5.4 Rest of South America
9.6 Middle East & Africa
9.6.1 Saudi Arabia
9.6.2 UAE
9.6.3 Qatar
9.6.4 South Africa
9.6.5 Rest of Middle East & Africa
10 Key Developments
10.1 Agreements, Partnerships, Collaborations and Joint Ventures
10.2 Acquisitions & Mergers
10.3 New Product Launch
10.4 Expansions
10.5 Other Key Strategies
11 Company Profiling
11.1 Sandvik AB
11.2 CPS Technologies Corporation
11.3 GKN Sinter Metals
11.4 3M
11.5 Metal Matrix Cast Composites
11.6 Deutsche Edelstahlwerke GmbH
11.7 Plansee Se
11.8 Ferrotec Corporation
11.9 Ceramtec
11.10 Materion Corporation
11.11 Sumitomo Electric Industries Ltd.
11.12 Hitachi Metals, Ltd.
11.13 Thermal Transfer Composites LLC
11.14 Santier
11.15 3A Composites
List of Tables
1 Global Metal Matrix Composites Market Outlook, By Region (2018-2027) ($MN)
2 Global Metal Matrix Composites Market Outlook, By Reinforcement Type (2018-2027) ($MN)
3 Global Metal Matrix Composites Market Outlook, By Discontinuous (2018-2027) ($MN)
4 Global Metal Matrix Composites Market Outlook, By Short Fibers (2018-2027) ($MN)
5 Global Metal Matrix Composites Market Outlook, By Whiskers (2018-2027) ($MN)
6 Global Metal Matrix Composites Market Outlook, By Particle (2018-2027) ($MN)
7 Global Metal Matrix Composites Market Outlook, By Continuous (2018-2027) ($MN)
8 Global Metal Matrix Composites Market Outlook, By Product (2018-2027) ($MN)
9 Global Metal Matrix Composites Market Outlook, By Magnesium Metal Matrix Composite (2018-2027) ($MN)
10 Global Metal Matrix Composites Market Outlook, By Refractory Metal Matrix Composite (2018-2027) ($MN)
11 Global Metal Matrix Composites Market Outlook, By Aluminium Metal Matrix Composite (2018-2027) ($MN)
12 Global Metal Matrix Composites Market Outlook, By Nickel Metal Matrix Composite (2018-2027) ($MN)
13 Global Metal Matrix Composites Market Outlook, By Copper Metal Matrix Composite (2018-2027) ($MN)
14 Global Metal Matrix Composites Market Outlook, By Super Alloy Metal Matrix Composite (2018-2027) ($MN)
15 Global Metal Matrix Composites Market Outlook, By Other Products (2018-2027) ($MN)
16 Global Metal Matrix Composites Market Outlook, By Cobalt (2018-2027) ($MN)
17 Global Metal Matrix Composites Market Outlook, By Iron Metal Matrix Composite (2018-2027) ($MN)
18 Global Metal Matrix Composites Market Outlook, By Cobalt-Nickel (2018-2027) ($MN)
19 Global Metal Matrix Composites Market Outlook, By Beryllium Metal Matrix Composite (2018-2027) ($MN)
20 Global Metal Matrix Composites Market Outlook, By Titanium Metal Matrix Composite (2018-2027) ($MN)
21 Global Metal Matrix Composites Market Outlook, By Production Technology (2018-2027) ($MN)
22 Global Metal Matrix Composites Market Outlook, By Casting (2018-2027) ($MN)
23 Global Metal Matrix Composites Market Outlook, By Compo-Casting (2018-2027) ($MN)
24 Global Metal Matrix Composites Market Outlook, By Stir Casting (2018-2027) ($MN)
25 Global Metal Matrix Composites Market Outlook, By Low-Pressure Casting (2018-2027) ($MN)
26 Global Metal Matrix Composites Market Outlook, By Gravity Casting (2018-2027) ($MN)
27 Global Metal Matrix Composites Market Outlook, By Deposition Techniques (2018-2027) ($MN)
28 Global Metal Matrix Composites Market Outlook, By Spray Foaming (2018-2027) ($MN)
29 Global Metal Matrix Composites Market Outlook, By Chemical Vapour Deposition (2018-2027) ($MN)
30 Global Metal Matrix Composites Market Outlook, By Electroplating (2018-2027) ($MN)
31 Global Metal Matrix Composites Market Outlook, By Liquid Metal Infiltration (2018-2027) ($MN)
32 Global Metal Matrix Composites Market Outlook, By Squeeze Casting Infiltration Method (2018-2027) ($MN)
33 Global Metal Matrix Composites Market Outlook, By Gas Pressure Infiltration (2018-2027) ($MN)
34 Global Metal Matrix Composites Market Outlook, By Powder Metallurgy (2018-2027) ($MN)
35 Global Metal Matrix Composites Market Outlook, By Extrusion/Rolling (2018-2027) ($MN)
36 Global Metal Matrix Composites Market Outlook, By Vacuum Pressing (2018-2027) ($MN)
37 Global Metal Matrix Composites Market Outlook, By Hot Pressing (2018-2027) ($MN)
38 Global Metal Matrix Composites Market Outlook, By Ball Mill Mixing (2018-2027) ($MN)
39 Global Metal Matrix Composites Market Outlook, By End User (2018-2027) ($MN)
40 Global Metal Matrix Composites Market Outlook, By Aerospace & Defense (2018-2027) ($MN)
41 Global Metal Matrix Composites Market Outlook, By Ground Transportation (2018-2027) ($MN)
42 Global Metal Matrix Composites Market Outlook, By Industrial (2018-2027) ($MN)
43 Global Metal Matrix Composites Market Outlook, By Electronics/Thermal Management (2018-2027) ($MN)
44 Global Metal Matrix Composites Market Outlook, By Marine (2018-2027) ($MN)
45 Global Metal Matrix Composites Market Outlook, By Nuclear (2018-2027) ($MN)
46 Global Metal Matrix Composites Market Outlook, By Healthcare (2018-2027) ($MN)
47 Global Metal Matrix Composites Market Outlook, By Automotive (2018-2027) ($MN)
Note: Tables for North America, Europe, APAC, South America, and Middle East & Africa Regions are also represented in the same manner as above.
Frequently Asked Questions
In case of any queries regarding this report, you can contact the customer service by filing the “Inquiry Before Buy” form available on the right hand side. You may also contact us through email: info@strategymrc.com or phone: +1-301-202-5929
Yes, the samples are available for all the published reports. You can request them by filling the “Request Sample” option available in this page.
Yes, you can request a sample with your specific requirements. All the customized samples will be provided as per the requirement with the real data masked.
All our reports are available in Digital PDF format. In case if you require them in any other formats, such as PPT, Excel etc you can submit a request through “Inquiry Before Buy” form available on the right hand side. You may also contact us through email: info@strategymrc.com or phone: +1-301-202-5929
We offer a free 15% customization with every purchase. This requirement can be fulfilled for both pre and post sale. You may send your customization requirements through email at info@strategymrc.com or call us on +1-301-202-5929.
We have 3 different licensing options available in electronic format.
- Single User Licence: Allows one person, typically the buyer, to have access to the ordered product. The ordered product cannot be distributed to anyone else.
- 2-5 User Licence: Allows the ordered product to be shared among a maximum of 5 people within your organisation.
- Corporate License: Allows the product to be shared among all employees of your organisation regardless of their geographical location.
All our reports are typically be emailed to you as an attachment.
To order any available report you need to register on our website. The payment can be made either through CCAvenue or PayPal payments gateways which accept all international cards.
We extend our support to 6 months post sale. A post sale customization is also provided to cover your unmet needs in the report.
Request Customization
We provide a free 15% customization on every purchase. This requirement can be fulfilled for both pre and post sale. You may send your customization requirements through email at info@strategymrc.com or call us on +1-301-202-5929.
Note: This customization is absolutely free until it falls under the 15% bracket. If your requirement exceeds this a feasibility check will be performed. Post that, a quote will be provided along with the timelines.
WHY CHOOSE US ?
Assured Quality
Best in class reports with high standard of research integrity
24X7 Research Support
Continuous support to ensure the best customer experience.
Free Customization
Adding more values to your product of interest.
Safe & Secure Access
Providing a secured environment for all online transactions.
Trusted by 600+ Brands
Serving the most reputed brands across the world.